ATX Power Supply- 12V ATX -- 24 VDC is available also
Various models
STC012300 STC012300
- 12V DC 300W ATX Power Supply
STC012350 STC012350 - 12V DC 350W ATX Power Supply
STC012400 STC012400 - 12V DC 400W ATX Power Supply
STC012450 STC012450 - 12V DC 450W ATX Power Supply
Series Model
Output Input Input Range Reverse Polarity Protection
Example Specs:-- 12 STC-12300 300Watts 12 VDC 9-18 VDC 50 VDC
ENVIRONMENTAL
CONDITIONS:
Cooling: Forced Air-cooling, 80x80x25 mm Fan x 1 (Two Ball Bearing
mode)
Operating Temperature: 0C ~ +60C
Operating Humidity: 20%~85% RH. (Non condensing)
Storage Temperature: -20C~+80C
Storage Humidity: 10%~90% RH. (Non condensing)
Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS:
Input connector
type 50A/ 300V UL Approved 3-Pin Terminal
Input Current 50A/20A(max.) @Full Load & Low Line
Inrush Current Less than 10A Cold start @25C ambient
DC OUTPUT CHARACTERISTICS:
OVERALL PERFORMANCE:
Efficiency 70% typical @12V DC Full Load
Hold up time 16ms @ Full load & Normal input voltage
Rise time
Power Good Signal TTL Compatible signal, on delay 100~500ms,
off delay 1ms min
Short Circuit Protection (SCP) All output equipped with SCP (shutdown
and latch off)
Over Power Protection (OPP) Peak power protected to 130%+-10%
of continuous rated power (shutdown and latch off)
Over Voltage Protection (OVP) +3.3, +5V, +12V & +3.3V
RELIABILITY:
MTBF (Mean Time Between Failure): >50,000 hours @max. Load,
12V DC & 25C ambient
Safety Standards: Meet UL60950 and TuV EN60950
Safety Approved:
EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPER22
(EN55022) Class B (CE mark)
Dielectric Withstand: Input to Output: 1500Vac for 1second
Dielectric Withstand: Input to Frame ground: 1500Vac for 1second
Leakage Current: <0.75mA @250Vac
Output Connector
Specific:
ATX 20 Pin: Molex39-01-2200 or equivalent
+12V(P4) 4 pin x1: Molex 39-01-2040 or equivalent
HDD, DVD 4 pin x8: Molex 8981-04P or equivalent
FDD 4 pin x1: AMP171822-4 or equivalent
Serial ATX: Molex 675820000 or equivalent
Process 8 pin x1: Molex 39-01-2080 or equivalent
Standard Output
Cable Length:
550mm
Power Chassis
Dimension:
150(W) x 140(L) x 86(H) mm
Net Weight:
2~2.3 kgm
Gross Weight:
2.1~ 2.4kgm
Packing Detail
8pcs
Measurement of
Carton
1.3Cuft
© MasTec Ltd