Data Acquisition Product Ethernet Data Acquisition USB Data Acquisition Synchronous Ethernet Data Logger Products Data Acquisition Software Data Acquisition Starter Kits The top picture is a high voltage isolated DAQ systems for monitoring AC, Motors etc. The next picture is a box that holds 5B signal conditioners and a DAQ module for simple industrial system building. And it just goes on.

Customisable DAQ with 5B Series Signal Conditoner The DI-718B and DI-718Bx Series data loggers (standalone or PC Connected) allow you to mix and match isolated industrial amplifiers that install in the chassis. Voltage, current, 4-20 mA process current, temperature, pressure, load, torque flow and any other industrial signal in any combination are supported. Record from as low as 0.0017 Hz to as much as 14,400 Hz (assumes SD latencies of 80 milliseconds or less) with Stand-alone models or from 0.0034 Hz up to 4,800 Hz with USB PC-connected instruments (WinDaq/HS required to achieve recording rates over 1,108 Hz with PC-connected instruments). The small sized DI-718B supports up to 8 channels, and the slightly larger DI-718Bx supports up to 16 channels

Visit DataQ

© MasTec Ltd