DesignTech
Industrial Graphical Operator Interfaces -- with touch screen control


GTC100

GTC200

GTC300
GTC600

The following is a brief description on the various types of operator panels MasTec Ltd now offers:

Item Pixels Overall Dim. (WxHxL) Viewing area (WxH) Type
Special features
GTC100 128x64 3.66x2.76x0.75 2.83x1.57 LED Transreflective readable in direct sunlight, very low current draw
GTC200 256x128 7.63x3.75x2.25 5.02x2.68 CCF Transmissive, very bright, high contrast
GTC300 320x240 6.60x4.30x1.75 4.76x3.58 CCF Transmissive, very bright, high contrast
GTC301 320x240 6.40x4.70x2.00 4.06x3.11 LED Transreflective readable in direct sunlight, very low current draw
GTC600 640x200 10.20x4.00x1.75 8.58x2.91 CCF Transmissive, very bright

Note: All dimensions in inches

For Micros, PC, PLC and Intelligent Controllers

  • Mono and Colour LCD displays
  • Touch Screens
  • RS-232 connection to Controller (ASCII commands)
  • Build the MMI Panel in PaintBrush/Corel and download (200+ panels)

Differentiator

  • Lowest Cost, Rapid Setup
  • No need for the SCADA computer for low cost jobs
  • Put a control window on your PLCs and Controllers
  • Simple ASCII Commands

Industrial Graphic Operator Interface with touch screen control:

Our product line consists of graphic displays with integrated touch screen controllers , graphic display hardware boards, and custom designed hardware/software.

Our displays/touch screens fill a unique niche. We specialize in small low cost graphic displays / hardware boards, with or with out touch screen -- perfect for the OEM who needs to get product to market fast and inexpensively.

Many of our customers have working GUI (graphic user interfaces) for their products within hours of receiving a Designtech Engineering development kit !

A typical module integrates a graphic display with transparent touch screen, interface micro processors and electronics, LCD controller/drivers, back lighting, power supply voltage converters (only +5VDC required), serial communication circuit (RS-232C), Flash eprom for "screen" storage, software with large instruction set for text and graphics, software for easy manipulation of touch buttons, software for image compression into onboard Flash eprom, exclusive software for creating graphic screens by PC paintbrush software (windows or DOS), easy integration with all micro processors .

The various modules integrate a graphic display with transparent touch screen, interface microprocessors and electronics, LCD controller/drivers, back lighting, power supply voltage converters (only +5VDC required or 9 to 26 VDC option), serial communication circuit (RS-232C), Static RAM or Flash EPROM for "screen" storage, software with large instruction set for text and graphics, software for easy manipulation of touch buttons, software for image compression into onboard Static RAM or Flash EPROM, exclusive software for creating graphic screens by PC Paintbrush software (windows or DOS), easy integration with all microprocessors and "piggyback" mounting and compatibility with PC/104 modules). The operator panels are available with or with out touch screen and or Bezels. Note: If no touch screen is used each unit has a 12 x 12 built in hardware/software matrix input which can be utilized for custom keypads.




  © MasTec Ltd