PC BASED MEASURING DEVICES

USB Scopes:-

The New M520 USB 2 Oscilloscope Series offer extremely simple and intuitive installation and operation, can adapt to any screen resolution (from 800 x 600 pixels upwards). They are powered directly from the USB interface.

Specifically speaking, the M520 Oscilloscope Family comprises of six USB oscilloscopes.

  • Size 106 x 163 x 35 mm (excl. connectors and feet)
  • Analog BW to 150MHZ
  • Sample rates to 100MSPS
  • Two vertical channels with 8-bit resolution
  • Deflection factor from 10mV/div to 5V/div in 1-2-5 steps.
  • Fully compatible with both USB 2.0 and USB 1.1
  • The devices are extremely portable, because they are powered directly from the USB interface
  • Thus do not need any kind of external power supply. Super portable.

Some Features:
Dual level triggering system with digital pulse length filter and event counter on each level. This allows displaying of very complicated events (i.e. displaying of the selected row of a video signal).

Virtual storage with size of 63000 samples. This feature allows to delay data acquisition from trigger event by maximum of 63000 samples.

Simple and complex triggering modes. Simple triggering mode is very easy to use; while using the complex mode, the customer can utilize the triggering possibilities to the fullest extent.

Standard triggering features, such as data acquisition before trigger, triggering from channel A, channel B and external trigger or setting the trigger threshold of both channels within the whole vertical range of display are also supported.

The vertical deflection system is, of course, equipped with all standard features, such as AC/DC switch, GND switch or probe input ratio selector (1:1, 1:10, 1:100). The measuring channel inputs withstand the voltage of +-200 V with no respect to the selected deflection factor.

A very useful feature of the vertical deflection system is Digital Shielding. When turned on, removes the asynchronous noise from the measured waveform without any influence to the frequency response.

Using the random sampling method is the horizontal deflection system capable of reaching the equivalent sampling frequency of up to 20GS/s. It also provides zoom functionality with factors from 10:1 to 1:16. The fastest timebase setting is 200ps/div with zoom factor set to 10:1 or 2ns/div with zoom ratio 1:1.

The standard oscilloscope software, which provides access to all functionalities of the device is accessible on the website of the ETC and is free of charge. When a customer keeps the software up-to-date, his hardware will be also in the up-to-date state, because big parts of the hardware are directly configured via software.

The customer, who has a need to control any of the M520 Series devices via own software, can use the M520DK API. It works with following operating systems: Windows 98 SE, ME, 2000, and XP.



Models:
M521 60MHz 50MS/s 5GS/s 4K
M522 60MHz 50MS/s 5GS/s 8K
M523 120MHz 100MS/s 10GS/s
M524 120MHz 100MS/s 10GS/s 8K
M525 150MHz 200MS/s 20GS/s 4K
M526 150MHz 200MS/s 20GS/s 8K
and more models keep coming ask.

Full specs also more pdf downloadables

Visit ETC

  © MasTec Ltd