Untitled Document

MasTec Comms & I/O Bits

OEM Ethernet Digital, USB Digital, USB Comms and Termination Modules

Low Cost OEM Modules Function

This USB to RS-232 board is the second generation low-cost integrated module for transferring serial data over USB.

This USB to RS-232 board is the second generation low cost integrated module for transferring data to and from a peripheral and a host PC at up to 8 Million bits (1 Megabyte) per second.

This I/O 8 ULN2803 Switch Board is a very useful accessory board that allows much higher voltage and current devices to be interfaced to the low level logic provided by the I/O24 modules ( use 3 for 24 bits)

The USBMOD5 is a integrated module based on the FTDI FT2232C Dual Channel USB UART / FIFO IC. The module features two Multi-purpose UART/FIFO controllers that can be configured in several different modes depending on the application.

The Ethernet MAX I/O 24 R is the second generatio. It has 24 bit digital I/O, 3 sets of 8 bit ports that can be in or out. It is RoHS compliant

This I/O 8 Combo Board can be connected to the I/O port of the modules to provide 4 Isolated relay contact outputs suitable for a variety of loads and 4 Opto Isolated inputs

The USBIO24 R is the ROHS Compliant version of our the USB I/O 24 range. The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port.

The I/O 24 Connector/LED Board can be connected to the I/O port of the modules to provide screw terminal connections with the optional added functionality of either pull up or pull down resistors as well as LED indication of the PORT Status

The I/O 24 Opto Input Board can be connected to the I/O port of the modules to provide 8 Opto Isolated inputs

The I/O 24 Connector Board can be connected to the I/O port of the modules to provide 8 switch/push buttons with LED indicators showing the status of the I/O pin.

The I/O 24 Relay Output Board can be connected to any I/O port of the modules to provide 8 Isolated relay contact outputs suitable for a variety of loads.

The USB I/O 24 DIP R is a Dual Inline Package version of the USB I/O 24 module. The module’s 50 pin Dual Inline Package (DIP) fits into a standard 50 pin 900mil wide IC Socket. This makes the USB I/O 24 DIP ideal for rapid prototyping and development work.

© MasTec Ltd

Low Cost OEM Modules	Function
	This USB to RS-232 board is the second generation low-cost integrated module for transferring serial data over USB.
	This USB to RS-232 board is the second generation low cost integrated module for transferring data to and from a peripheral and a host PC at up to 8 Million bits (1 Megabyte) per second.
	This I/O 8 ULN2803 Switch Board is a very useful accessory board that allows much higher voltage and current devices to be interfaced to the low level logic provided by the I/O24 modules ( use 3 for 24 bits)
	The USBMOD5 is a integrated module based on the FTDI FT2232C Dual Channel USB UART / FIFO IC. The module features two Multi-purpose UART/FIFO controllers that can be configured in several different modes depending on the application.
	The Ethernet MAX I/O 24 R is the second generatio. It has 24 bit digital I/O, 3 sets of 8 bit ports that can be in or out. It is RoHS compliant
	This I/O 8 Combo Board can be connected to the I/O port of the modules to provide 4 Isolated relay contact outputs suitable for a variety of loads and 4 Opto Isolated inputs
	The USBIO24 R is the ROHS Compliant version of our the USB I/O 24 range. The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port.
	The I/O 24 Connector/LED Board can be connected to the I/O port of the modules to provide screw terminal connections with the optional added functionality of either pull up or pull down resistors as well as LED indication of the PORT Status
	The I/O 24 Opto Input Board can be connected to the I/O port of the modules to provide 8 Opto Isolated inputs
	The I/O 24 Connector Board can be connected to the I/O port of the modules to provide 8 switch/push buttons with LED indicators showing the status of the I/O pin.
	The I/O 24 Relay Output Board can be connected to any I/O port of the modules to provide 8 Isolated relay contact outputs suitable for a variety of loads.
	The USB I/O 24 DIP R is a Dual Inline Package version of the USB I/O 24 module. The module’s 50 pin Dual Inline Package (DIP) fits into a standard 50 pin 900mil wide IC Socket. This makes the USB I/O 24 DIP ideal for rapid prototyping and development work.