Universal programmers Measurement Instruments Balancing and vibration measurement systems Hardware and software tools for electronic developers

Universal programmers -- Single and Ganged Systems -- many to choose from.

Measurement systems -- USB Oscilloscopes and Logic Analysers

ScopeLogicDAQ Complete data acquisition system - composition of Digital Oscilloscope and Logic Analyzer Maximum sampling rate: 400MHz - 8 digital channels 200MHz - 8 digital channels, 1 analog 100MHz - 16 digital channels, 2 analog ADC resolution: 8 bits Analog bandwidth: 20MHz Input voltage range: 25V (probe 1:1) 128KB data buffer (optionally 512KB) Spectral analysis (FFT) Easy to use software more specs

LogicDAQ

32-channel Logic Analyzer Maximum sampling rate: 400MHz - 8 channels 200MHz - 16 channels 100MHz - 32 chanels 128KB data buffer (optionally 512KB) Easy to use software more specs

ScopeDAQ

sampling rates up to: 200MHz 2 analog channels ADC resolution: 8 bitów Data buffer: 128KB or 512KB (available after memory expansion) analog signal range: ±25V (probe 1:1) analog bandwidth: 20MHz extended triger system spectral analysis - FFT plot X-Y simple in use software ScopeDAQ 2 sampling rates up to: 100MHz 2 analog channels ADC resolution: 12 bits Data buffer: 128KB or 512KB (available after memory expansion) analog signal range: ±10V (probe 1:1) analog bandwidth: 120MHz extended triger system spectral analysis - FFT plot X-Y simple in use software more specs

PenScopeDAQ

handy digital Scope realized in pen-type housing. sampling rates up to: 100MHz 1 analog channel ADC resolution: 8 bits Data buffer: 128KB analog signal range: ±25V (probe 1:1) analog bandwidth: 20MHz extended triger system spectral analysis - FFT available in BNC version or with needle doesn't require an external power supply simple in use software more specs

Vibration systems -- USB DAQ VibroDAQ

Dynamic one and two-plane balancing of rigid rotors. In-place and stand balancing. Machine technical state evaluating basing on vibration measurements. Innovative digital measurements method with 16-bit resolution. Two independent measurement channels. Laser speed sensor. Temperature measurement in sensor mount place. Operation with full range of vibration sensors: accelerometric, velocity and displacement. Wide interfaces supported: ICP, current loop, voltage level. Grinding wheel balancing directly on the grinder. Measured rotational speed range 0,1Hz - 10kHz. Sampling rate range: 10Hz - 200kHz. Buffer length: max. 32k 16-bit samples per channel. Synchronous and asynchronous spectrum analysis. Correction mass decomposition. Connector for automated stand operation. Status and error LEDs. Power supply directly from USB port, optional external supplier. Fast USB 2.0 interface (High speed, Full speed) for short data transfer times. Multi-language user interface. Durable and esthetic metal case. Carry case for instrument and accessories.

Visit RK-Systems

© MasTec Ltd