| Model |
|
Stocked |
| |
 |
|
| 8102 |
PCI
Low profile
8 reed relay & 8 digital input |
Stocked |
| |
The
8012 Low Profile PCI digital interface provides eight Reed relay
outputs (SPST) and eight optically isolated inputs. Reed relays
are well suited for low current applications. The relays are
normally open, and close when energized. The board is MD1 Low
Profile and Universal Bus (3.3V and 5V) compatible. |
Sealevel's
SeaI/O Classic software drivers and utilities make installation
and operation easy using Windows 98, ME, NT, 2000, XP and Vista
operating systems. |
| |
|
|
| |
M Series
Interface Modules |
|
| |
 |
based
on 24 bit digital I/O systems, use PCI, USB from Sealevel and
many other manufacturers |
| M200 |
Baseboard
module interfaces to eI/O M-Series I/O boards |
Stocked |
| |
The
M200 baseboard module connects eI/O family interface modules
to digital control boards (e.g. Sealevel’s PIO series of
boards and USB adapters) via a 50-pin ribbon cable. This cabling
is backward compatible with PB-24/32 connections. System power
can be input from the ribbon cable, an external 5VDC input or
external 9VDC to 30VDC input using the on-board regulator. On-board
LEDs indicate input power status and connection of up to four
eI/O modules. |
|
| M240 |
8
optically isolated inputs |
$Ask |
| |
M240
modules provide 8 channels of optically isolated inputs for monitoring
a variety of real-world devices. Inputs can range from 12-24VAC/DC
and field wiring is connected via two removable 8-pin terminal
blocks. For convenience connecting ground signals, “commoning”
jumpers are provided that tie each input’s ground connection
to common. Status of each input (on/off) is displayed via on-board
LEDs. |
|
| M250 |
8
optically isolated Darlington array, open-collector output channels |
$Ask |
| |
The
M250 is an optically-isolated open-collector output module designed
to control up to 24VDC devices. 500VDC isolation protects electronics
from over-voltage damage. Connection to field wiring is accomplished
via a 10-pin removable terminal block. Output state of each bit
is displayed via on-board LEDs. Requires power supplied to field
terminal block from external supply such as the optional PS101. |
|
| M251 |
8
optically isolated, source driver, emitter-follower output channels |
$Ask |
| |
The
M251 is an optically-isolated emitter-follower output module
designed to control up to 24VDC devices. 500VDC isolation protects
electronics from over-voltage damage. Connection to field wiring
is accomplished via a 10-pin removable terminal block. Output
state of each bit is displayed via on-board LEDs. Requires power
supplied to field terminal block from external supply such as
the optional PS101. |
|
| M260 |
8
SPST (Form A) dry contact Reed relay output channels |
$Ask |
| |
The
M260 provides 8 SPST (Form A) dry contact Reed relay outputs.
Reed relays provide high quality, long life switch closures and
are well suited for low current applications. Field wiring connections
are made to the module via two removable 8-pin screw terminal
blocks. On-board LEDs indicate status of each relay(open/closed). |
|
| M270 |
8
SPDT (Form C) dry contact relays capable of driving up to 2A |
$Ask |
| |
The
M270 supplies 8 SPDT (Form C) dry contact relays that can be
wired for normally-open or normally-closed operation at up to
2 amps. Field wiring is connected via two 12-pin removable terminal
blocks. On-board LEDs indicate status of each relay (open/closed). |
|
| M271 |
8
SPDT (Form C) dry contact relays capable of driving up to 8A |
$Ask |
| |
The
M271 supplies 8 SPDT (Form C) dry contact relays that can be
wired for normally-open or normally-closed operation at up to
8 amps. Field wiring is connected via two 12-pin removable terminal
blocks. On-board LEDs indicate status of each relay (open/closed). |
|
| M280 |
Carrier
board capable of accepting 1 or 2 quad solid state relay modules
(QSSR) |
$Ask |
| |
The
M280 module allows easy interface to one or two industry standard
quad solid state relays (QSSR). The module can be configured
as 8 inputs or 8 outputs and will accept AC and DC QSSRs. QSSRs
sold separately. Input modules have built-in filtering to provide
clean signals to the control system, and include transient protection
circuitry. Field wiring connection is made via two 6-pin removable
terminal blocks. Each I/O channel is protected by a 5A fuse which
is socketed for easy replacement. |
|
| M290 |
Proto
board supplies 26x28 row/column, double sided for custom circuit
design |
$Ask |
| |
M290
Need a particular
combination of I/O not found on our standard eI/O modules? The
M290 prototyping board offers an easy solution. The prototyping
area is on .10" centers and offers 26 rows and 28 columns.
Data bits D0 through D7 are buffered by a 74HCT245. A jumper
allows the direction of the `245 buffer to be configured as either
input or output. Two 2-pin removable terminal blocks are provided
to connect field wiring to the module. |
|
