Ultrasound Leakage is not only an early indicator of costly probe damage, but can be extrememly dangerous. Our ULT series Tester and Adapters offer a quick and easy way to cust costs and liabliltiy.  

Ultrasound Leakage Tester - Base Model

ULT-2010
  

Ultrasound Leakage Tester w/Meter Mode & Logging

ULT-2020
  

Ultrasound Transducer Adapters

EXPMT-2000

The ULT-2000 Series is a family of microprocessor-based, ultrasound transducer leakage testers.The ULT-2010 measures both the conductivity of the cleaning medium and the leakage current of the ultrasound transducer.

The ULT-2010 measures both the conductivity of the cleaning medium and the leakage current of the ultrasound transducer.

Features:
• Large graphics display with cursor selection of options and setup of parameters
• User-selectable source (challenge) voltage (90 to 275 VAC)
• User-selectable source (challenge) frequency (50 or 60 Hz)
• User-selectable test limits by ultrasound transducer manufacturer and model
• 1% FS measurement accuracy
• Auto ranging with 10, 250, or 500 mA FS
• Automatic internal self test
• Single button press for full system test
• Simple pass / fail mode – for non-technical users
• Analytical mode – for technical users
• Digital calibration – no pots to turn
• User-selectable display options
• Battery life display (0 to 100%)
• Programmable backlight timer
• Contrast is software adjustable
• Flash upgradeable firmware
• RS-232 Communications
• PC software (limit configuration tool)
• Serial printer output with programmable user header
• Real time clock
• Compatible with Dale Technology® Dale 800 and Fluke Biomedical® ULT 800 ultrasound transducer adapters and dual conductivity probes

 

The ULT-2020 offers the same features of the ULT-2010, plus a Meter Mode and data logging.

After many months of conducting an exhaustive evaluation of the BC Group’s Ultrasound Leakage Tester and Probe Adapter, Philips Ultrasound has issued the following statement:

“The BC Biomedical ULT-2020 Current Leakage Tester with the ULT-PA-19 Adapter have been validated by Philips Ultrasound for use with the X7-2t, S7-3t, and S8-3t compact connector TEE transducers.”


Ult-2020 (Meter, Datalog) has all the basic model features plus:
• Meter mode for extended measurement periods
• Programmable meter source (challenge) voltage and frequency
• Programmable meter timer
• Datalog with storage of 99 test records

 

Soft Touch Adapters for use in the ULT-2000 System. There are numerous models to provide the proper connection of the ULT Transducer to be tested to the system. OEM connectors are used to protect the ULT Transducer Connection pins from being damaged during the test process.

Adapters available for:

  • Acuson/Siemens
  • Sonosite
  • Siemens
  • Siemens/Acuson
  • Phlips/ATL
  • GE
  • Philips/ATL Mindray
  • Philips/HP
  • Phlips/Mindray/Samsung/KOELIS
  • Acuson/Toshiba
  • Hitachi
  • Ultraschallkopf-Aloka
  • All Transducers (Pencil)
  • Zonare
  • GE/Samsung (Comes with protective doors)

 

 ULT Conductivity Probes

  

Leakage Tester for Intuitive Surgical's ION Catheter

  

ULT-2000 Series Accessories

• Soak Tray

• ULT Series Printer Kit

• ULT Series Printer Paper

• Comms Cables

• Battery Eliminator

• Carrying Cases (Soft)

• Printer Power Supplies

• ULT Fork Adapter

• ULT Splitter

• GE ULT Test Kit

 BC Biomedical's Dual Conductivity Probes come in multiple probe lengths. They are used as part of the ULT-2000 to provide the electrical connection to the fluid in the test bath or tube during the testing.

Short: 2.425" (6.16 cm)

Mediam: 3.5" (8.9 cm)

Long/Extra Long Comes with 2 interchangeable probe lengths:

• Long Probe Length: 4.88" (12.4 cm)
• Extra Long Probe Length: 11.58" (29.41 cm)

GUS cleaning systems w/ electrodes

Small & Flexible, General Use

For CS Medical

 

 The ULT-2020-7193 is used speficifically for testing Intuitive Surgical's ION Catheter.

ULT-2020-7193 Features:
• Large graphic display
• Selectable options and parameter setup
• User-selectable source (challenge) voltage (90 to 275 VAC)
• User-selectable source (challenge) frequency (50 or 60 Hz)
• 1% FS measurement accuracy
• Auto ranging with 10, 250, or 500 mA FS
• Automatic internal self test
• Single button press for full system test
• Simple PASS / FAIL mode – for non-technical users
• Analytical mode – for technical users
• Digital calibration – no pots to turn
• Battery life display (0 to 100%)
• Programmable backlight timer
• Flash-upgradeable firmware
• RS-232
• PC software (limit configuration tool)
• Real time clock
• Meter mode for extended measurement periods
• Programmable meter source (challenge) voltage and frequency
• Programmable meter timer
• Datalog with storage of 99 test records

 

 

Talk to a MasTec Sales Engineer


© MasTec Ltd 1997- 2025