Display Multiple Parameters
IT8600 provides 7 inch LCD display
screen, easy user interface. Give full consideration to engineers'
requirements in different tests, IT8600 not only can display
multiple parameters simultaneously,but also has diversified display
modes for choice, such as waveform, histogram and list etc.
Harmonic Measuring And Analysis
IT8600 provides powerful data
measurement function, which can not only support measurement
of conventional parameters such as Vrms, Vpk, Vdc, Irms, Ipk,
Idc, W, VA, VAR, CF, PF and Freq, but also provide unique voltage
harmonic analysis function to verify the harmonic interference
of the object (UPS, generators, etc.) to be measured over the
grid. The harmonic measurement function supports analysis up
to the 50th voltage harmonic and it can display the percentage
of each harmonic analysis results in different forms.
Newsletter - August 2019
Techs AC Load IT8600 AC Electronic Load
IT8600 is ITECHs latest series
of AC/DC electronic loads with power range 0~14.4 kVA and adjustable
frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display
function of IT8600's can display input voltage & current
as waveform. It is equipped with measurement modes for different
parameters such as inrush current, peak value, effective value,
PF (power factor). Voltage harmonics measurement capacity is
up to 50th. The built-in RS232, GPIB, LAN and USB communication
interfaces are for reliable and fast control. IT8600 is the perfect
solution for testing UPS, inverters, AC power supplies and relevant
AC electronic components etc.
Frequency range: 45 Hz~450
Power range: 0~14.4 kVA
Voltage range: 50~420 Vrms, 15~260 Vrms
Current range: 0~1 60 Arms
Parallel connection/ three-phase control *1
7 LCD screen
Oscilloscope function supporting display of voltage and
High-speed AD sampling, real-time capture waveform
Measure Vrms, Vpk, Vdc, Irms, Ipk, Idc, W, VA, VAR,CF,
PF and FREQ
Measures THD ( V ) up to 50th Harmonic
AC electronic load: CC/CR/CP mode
DC electronic load: CC/CR/CP/CV mode
External 0~10 V analog control input, voltage and current
analog monitoring function
OTP, OCP, OVP, UVP and OPP protection function
GPIB, LAN and USB communication interfaces and external
USB flash disk interface
* 1 IT8615 and IT8615L are with
AC Power Supply
If you would like to contact us about
this product series, feel free to email us.
IT8600 provides parallel
and 3-phase functions for three-phase and high-power applications.
In 3-phase applications, users can make Y or
connection according to their specific requirements. IT8600 is
available for AC 380V input to meet diverse test requirements.
( *Only IT8615 and IT8615L are with this function)
The most unique highlight
of IT8600 lies in the oscilloscope display function, which can
display the input voltage and current waveform of the device
measured. Through the screenshot function key to save the current
screen picture to peripheral storage disk by the front USB interface,
easy for the second analysis.
IT8600 AC/DC electronic
load is with I/V monitor and allow users to observe current and
DUT output voltage through connecting to oscilloscope of BNC.
The function is very useful for users to monitor the change of
voltage and current by waveforms. Not only simplify the wiring,
improve the measurement accuracy, but also save test cost without
oscilloscope current probe